сите категории
EN

сите

Машина за топење и сечење на јаже со заострена глава

Машина за топење и сечење на јаже со заострена глава

  • Преглед
  • Параметар
  • Пребарување
  • Поврзани производи
Model: WT-500.
Feeding device: step motor control; Load capacity(500kg); max speed(450r/min).
Wire feeding device included as standard configuration.
Melting device: electric resistance welding, work current adjusted by controller.
The melting section is conical, the largest circular surface diameter of the conical surface is smaller than the diameter of the wire rope, the melting section is not scattered, the length of the cone and the flat head are freely adjusted.
The cutting length size can be adjusted on the touch screen by the “Total Length” display box, pop-up digital setting keyboard, and the length can be set arbitrarily.
The clamping system and drawing system is driven by pneumatic device.
The machine is whole controlled by the PLC system with touch screen.
Енергетски систем:220V/ 380V, 50Hz, 3Phase
Pressure air source:0.4-0.6MPa pressure air supply.
Дијаметар на кабел:2.0-5.0mm
Должина:170mm-30m
Length tolerance:±2‰(per 1mm)
Големина на машината:80x70x150cm

СТАПИ ВО КОНТАКТ

Жешки категории