- Преглед
- Параметар
- Пребарување
- Поврзани производи
- Horizontal structure and circulation processing is adopted in the machine.
- Low gravity L model structure is designed in the main unit, it is high intensity and good rigidity.
- Headstock moving of main spindle is driving by hydraulic and oriented by roll linear guide way.
- Adding pressure is separated with sliding organ.
- Import bearing is used in main spindle bearing.
- Rotating plate radial jump and end jump is controlled within 0.01mm.
- Oil splash lubrication is adopted in the main spindle bearing.
- Frequency conversion stepless regulation is adopted in rotation of main spindle and ball feeder.
- Electrical system is controlled by PC, ball pile switch is set in the ball inlet.
- Stop protection device is set in the main spindle.
- Resin grinding wheel can be used to grinding instead of lapping.
- Horizontal structure and circulation processing is adopted in the machine.
- Main unit head is connected with tailstock by bridge board and formed closing frame, it is with good rigidity and high anti-distortion power.
- Strengthen beam in the machine bed inner is designed optimization and reasonable layout, increase strength and anti-impact and anti-distortion power.
- Main unit is separated with main driving system, double speeds motor is adopted in main driving system, structure of main driving is designed optimization renew.
- Flat ball feeder is adopted in the machine, AC. frequency conversion stepless speed regulation is used in the ball feeder's rotating..
- A ball flowing slope is set in the ball inlet, the ball can flow into from the ball feeder's tangent.
- Hydraulic driving is used for adding pressure, accumulator is used for keeping pressure.
It is suitable for diameter 3-12.7mm ball blank's flashing and cutting process.
Ball size range to be processed: | 3 ~ 12.7мм |
Size of flashing palte (D*d*h): | 800 360 × × 100mm |
Speed of main spindle: | 80/120 r/min |
Макс. работен притисок: | 200KN |
Max. capacity of ball feeder: | 450kg |
Speed of main spindle: | 80-120r / мин |
Speed ofmaterial plate: | 0.12-0.84r / мин |
Главна моќност на моторот: | YD225M-6/4, 26/32kw, 935/1430r/min |
Material Plate motor: | Y90L6, 1.1kw, 935r/min |
Oil pump motor: | Y90S4, 1.1kw, 1430r/min |
Димензии на машината: | 3300 3300 * * 1900mm |
Тежина на машината: | 10000kg |
модел | 3M4980 |
Ball size range | Φ5~φ50mm |
Size of flasing plate (D*d*h) | 800 360 * * 100mm |
Макс. работен притисок | 300KN |
Макс. капацитет | 450kg |
Rotating disk speed | 90/135 r/min |
Feeding plate speed | 0.12-0.84r / мин |
Главната моќност на мотор | 42 / 55kw |
Rotating disk motor power | 1.5kw |
Моќност на моторот на пумпата за масло | 1.5kw |
Машинско димензија | 3740 3500 * * 1800mm |
Тежина | 15500kg |
FOB Цена | $39,800.00 |